Mechanical Specifications Cylindrical Mortise Exit Trim Handing Handed to order, field reversible ANSI standard (meets or exceeds) A156.25 locked outdoor A156.2 Series 4000 Grade 1 A156.25 locked outdoor A156.13 Series 1000 Grade 1 A156.25 locked outdoor A156.3 Grade 1 Door thickness 1-3⁄4" standard, 1-3⁄8" to 2-3⁄4" optional (available in 1⁄8" increments) Backset Standard: 2-3⁄4" Optional: 2-3⁄8", 3-3⁄4", 5" 2-3⁄4" only Defined by exit device Latch bolt Standard: 1⁄2" throw Optional: 3⁄4" throw Standard: 3⁄4" throw Optional: 1" throw on mortise deadbolt Provided by exit device Levers Pressure cast zinc, plated Strike Standard: 1-3⁄16" lip, ANSI, 1-1⁄4" x 4-7⁄8" Optional: Additional configurations available, please see price book Provided by exit device Cylinder and keys Schlage® 6-pin Everest 29 S123 keyway Conventional cylinder with two patented keys standard. Additional options available including SFIC, FSIC and competitor brands. See lever and cylinder compatibility data sheet. FMK Multi-Technology Reader Specification Credential technologies Proximity (125 kHz), Smart (13.56 MHz) Standards ISO 15693, ISO 14443 Read range Proximity: up to 1.25"; Smart: up to .75" Proximity credential support Compatibility: Schlage, HID2, GE/CASI ProxLite®, AWID® and LenelProx® Smart credential support Secure sector compatibility: Schlage MIFARE Classic®, Schlage MIFARE Plus®, Schlage MIFARE® DESFire®; PIV and PIV-I1 CSN only compatibility: HID iCLASS®, HID iCLASS SE®, Inside Contactless Pico Tag®, MIFARE Classic/Plus/DESFire, ST Microelectronics®, Texas Instruments Tag-It®, Phillips I-Code® Certifications FCC, Industry Canada (IC), UL 294 Options 12 button, 3 x 4 matrix backlit keypad 1. 75 bit output format default. Configurable to other output formats. 2. Proximity bit lengths greater than 37 not supported. Allegion, the Allegion logo, Falcon, Schlage, the Schlage logo, and Von Duprin are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners. AD Series FMK Reader Modules The AD Series is an ideal solution for applications which require approval by the U.S. Federal Government under HSPD-12 for FIPS 201-2 compliance. It is possible to upgrade existing, non-compliant AD Series locks to the new standard as follows: • Field upgrade AD Series locks not currently set up for FIPS 201-2 by replacing the reader module with a FIPS 201-2 PIV-I capable FMK reader (sold separately) • Field upgrade AD Series FIPS 201-1 compliant locks with an FMK reader manufactured after August 2016 by uploading FIPS 201-2 compatible firmware (AD.A.121 or higher) Both types of upgrades should only be performed by a PACS provider who has tested and been approved under HSPD-12 for AD Series integration. PIV capable • The FMK reader is required on AD Series locks to achieve FIPS 201-2 compliance; It supports proximity cards and is PIV-I capable using 13.56 MHz smart card technologies KEYPAD FIPS 201-2 APL Listed Networked Hardwired Electronic Lock AD-302 AD Series exit trim is compatible with Von Duprin 98/99 and 98/99XP (rim, mortise, SVR; and CVC, CVR on metal doors only), Von Duprin 22/22F (rim and SVR) and Falcon 25 (rim) exit devices from Allegion. The AD Series is also compatible with select rim exit devices from Sargent, Corbin Russwin, Yale, Dorma and Precision. For Von Duprin and Falcon solutions, a low current request-to-exit switch (RX-LC or AE) is required. The part numbers are: Von Duprin: 050281 Falcon: 650359 Refer to the AD Series Exit Trim Compatibility Guide for additional details.
